"SM-3S26 6x scope with 100mW adjustable illuminator included "

The SM-3S2 series of scopes, formerly marketed as the HTH-731 offers very high quality matched with an exceptional price. The 6x magnification is ideal for centre fire rifles for serious predator control at long ranges. Typical ranges on foxes for the SG are 250 yards and 300 yards for the HG.

"Fast F1.5 lens system"		"Integrated power and reticle control"

We have revised the design to make the scope lighter and more compact. We have also strengthened and increased the length of the weaver mounting system to fit everything from air rifles and rimfire to long action centre fire rifles.

The scope is available with either a SG or HG image intensifier tube as standard and XR5 to order.

Do not confuse this scope with others that use cheaper USA Gen2+ tubes. Even the SG version of this scope has four times the performance of USA Gen2+ and is equivalent to older Gen3! The HG version is comparable if not better than newer Gen3!

The main design features of the scope are:

• Large adjustable focus multi coated objective lens to gather maximum light and provide maximum depth of field.
• Highest quality and resolution image intensifier tube.
• All aluminium lightweight high strength casing.
• Illuminated black or red on green fine mil-dot reticle with infinately variable brightness.
• Powerful detachable adjustable 100mW actual light output LED infra red illuminator with 3 power settings and adjustable beam focus.
• Automatic brightness control

This specification equates to a high performance night vision scope backed by a full 12 month UK warranty.

Specifications
	SM-3S26SG	SM-3S26HG
Mounting	7/8" Weaver or Picatinny
Reticle	Fine Mil-Dot
Resolution	50-55lp/mm	60-65lp/mm
FOM (Figure Of Merit)	1200	1600
Equivalent of	Supergen SHD-3 / Gen3 omni III	Hypergen XD4 / Gen3 omni IV
Magnification	6x
Objective	F1.5 110mm
Variable focus range	4m - infinity
Field of view	9.5 degrees
Eye relief	50mm
Ocular adjustment	+/- 4 diopters
Power of LED infra red illuminator	20/50/100mW light output
Supply voltage	3V DC 2xAA (1 x CR123 for illuminator)
Windage / Elevation	1/2 MOA per click
Temperature range	-20 - 40 degrees centigrade
Dimensions	290x90x52
Weight	1 KG
Price	£2250	£2550

The sight is supplied with a weaver rail base, an aluminium objective lens cover with pinhole for daylight use, a textile storage case, tube data test sheet and conplete instructions.